P+F控制单元,UC4000-30GM-IUR2-V15
Measuring automation light grid with a beam gap of 25 mm,
O-Link interface, push-pull output, fixed cable with M12 plug
有效检测距离 Standard : 0.3 ... 6 m
Z大检测距离 7.5 m
光源类型 红外光
光源类型 modulated infrared light , 850 nm
扫描高度 see Table 1, max. 3200 mm
光束间距 25 mm
光束数量 see Table 1, max. 129
控制器 Receiver: 2 touch buttons for programming
接口类型 IO-Link ( pin 4 )
IO-Link Revision 1.0
COM-Mode COM 2 (38.4 kBaud)
P+F控制单元,UC4000-30GM-IUR2-V15
Min. cycle time 2.3 ms
Process data witdh 16 bit
输出开关类型 Factory setting: dark on , Switchable to light-on mode
信号输出 Command interface: Pin 4 IO-Link interface C
or used as switching output Q; 1 short-circuit
proof reverse polarity protected push-pull output (receiver)
IEC 60947-5-2:2007
防护 IP67
连接器 Emitter: 200 mm connecting cable with 4-pin,
M12x1 connector
Receiver: 200 mm connecting cable with 8-pin,
M12 x 1 connector Cable cross section min. 0.25 mm2
Max. cable length 30 m
外壳 extruded aluminum section , Silver anodized
光学透镜 Plastic pane , Polycarbonate
P+F控制单元,UC4000-30GM-IUR2-V15
销售部